Message

Welcome to the official site of IIE. Our goal is to to bring together Researchers, Scientists, Engineers, Scholars and Students in the areas of Engineering & Technology, and provides a forum for dissemination of results, new ideas, Research & development and practical experiments, which concentrate on both theory and practices, for the benefit of common man.
IIE-Chair
Read More

Scientific Board of Industrial & Mechanical Engineers

  • Prof. Dr. Mohammad Nazri Mohd Jaafar
    Dept: Aeronautical Engineering,
    Universiti Teknologi Malaysia,
    Malaysia
  • Assoc. Prof. Dr. Avanish Kumar Dubey Dubey
    Dept: Mechanical Engineering,
    Motilal Nehru National Institute of Technology Allahabad, Uttar Pradesh (India),
    India
  • Assist. Prof. Dr. Pal Pandian P
    Dept: Mechanical Engineering,
    Christ University,
    India
  • Assist. Prof. Dr. Mahdi Shahriarinour
    Dept: Department of Microbiology,
    Science and Research Branch, Islamic Azad University Guilan, Iran ,
    Malaysia
  • Assist. Prof. Dr. Indrajit Mukherjee
    Dept: Shailesh J. Mehta School of Management,
    Indian Institute of Technology Bombay,
    India
  • Assist. Prof. Dr. M. Chithirai Pon Selvan
    Dept: Mechanical Engineering,
    Manipal University, Dubai,
    United Arab Emirates
  • Assoc. Prof. Dr. Balasivanandha Prabu S
    Dept: Mechanical Engineering,
    Anna University,
    India
  • Assist. Prof. Dr. Panagiotis Kyratsis
    Dept: Mechanical and Industrial Design Engineering,
    Technological Educational Institution of West Macedonia,
    Greece
  • Dr. Vishal naranje
    Dept: Department of Technology,
    University of Pune,
    India
  • Prof. Dr. M.Chandrasekaran
    Dept: Mechanical Engineering,
    Vels University, Chennai,
    India
  • Assist. Prof. Dr. Mojtaba Aghajani Delavar
    Dept: Mechanical Engineering,
    Babol Noshirvani University of Technology,
    Iran
  • Dr. Nik Ahmad Ridhwan Nik Mohd
    Dept: Department of Aeronautics, Automotive & Ocean Engineering,
    Universiti Teknologi Malaysia,
    Malaysia
  • Dr. Aldy Gunawan
    Dept: School of Informatics & IT,
    Temasek Polytechnic,
    Singapore
  • Prof. Dr. Murali Krishna Baratam
    Dept: MECHANICAL,
    VITS College of Engineering,
    India
  • Dr. Waleed Ahmed
    Dept: Faculty of Engineering, ERU,
    UAE University,
    United Arab Emirates
  • Prof. Dr. B.Rajendra Prasath
    Dept: Mechanical Engineering,
    Fatima Michael College of Engineering & Technology,
    India
  • Assoc. Prof. Dr. Harpuneet Singh
    Dept: Department of Mechanical Engineering, School of Engineering,
    Sri Guru Granth Sahib World University,
    India
  • Prof. Dr. Virendra Kumar Khare
    Dept: Mechanical Engineering,
    Maulana Azad national institute of Technology Bhopal(M.P) ,
    India
  • Dr. Sivaprakash Palanisamy
    Dept: MECHANICAL ENGINEERING,
    Karpagam Institute of Technology,
    India
  • Prof. Dr. Bassim Hameed
    Dept: School of Chemical Engineering,
    University of Science Malaysia,
    Malaysia
  • Prof. Dr. Salim Hiziroglu
    Dept: Natural Resource Ecology and Management,
    Oklahoma State University,
    United States
  • Assist. Prof. Dr. Awadhesh Gaur
    Dept: MECHANICAL ENGINEERING,
    Institute Of Engineering And Technology,
    India
  • Dr. Chuks Diji
    Dept: Mechanical Engineering,
    University of Ibadan,
    Nigeria
  • Assist. Prof. Dr. Deepak Mohapatra
    Dept: MECHANICAL,
    TAT,BHUBANESWAR,
    India
  • Assist. Prof. Dr. Rafiq Ahmad
    Dept: Mechanical Engineering,
    CECOS University of IT and Emerging sciences,
    Pakistan
  • Assoc. Prof. Dr. Ahmed Sarhan
    Dept: Mechanical Engineering Department,
    University of Malaya,
    Malaysia
  • Assist. Prof. Dr. Pragya Shandilya
    Dept: Mechanical Engineering,
    Motilal Nehru National Institute of Technology, Allahabad,
    India
  • Prof. Dr. Ravindra Kommineni
    Dept: Mechnaical Engineering,
    RVR & JC College of Engineering,
    India
  • Dr. Pandian Vasant
    Dept: Optimization,
    Power Control Optimization,
    Malaysia
  • Assist. Prof. Dr. Morteza Mohammadzaheri
    Dept: Mechanical Engineering,
    Islamic Azad University,
    Iran
  • Assoc. Prof. Dr. Dr.M.Pradeep Kumar
    Dept: Mechanical Engineering,
    Anna University,
    India
  • Assoc. Prof. Dr. Ayo Samuel Afolabi
    Dept: Department of Civil and Chemical Engineering,
    University of South Africa - Unisa,
    South Africa
  • Dr. William Pao
    Dept: Mechanical Engineering,
    Universiti Teknologi PETRONAS,
    Malaysia
  • Assoc. Prof. Dr. Madhu Jain
    Dept: Department of Mathematics,
    Indian Institute of Technology Roorkee,
    India
  • Prof. Dr. Samy Oraby
    Dept: Mechanical Production Technology,
    college of technological studies,
    Kuwait
  • Dr. Sivasankaran Sivanandam
    Dept: Institute of Mathematical Sciences,
    University of Malaysia,
    Malaysia
  • Prof. Dr. D.Abdul Budan
    Dept: Mechanical,
    University BDT College of Engineering, Davangere,
    India
  • Dr. Khameel Mustapha
    Dept: Mechanical Engineering,
    Swinburne University of Technology,
    Malaysia
  • Dr. Corinthias P.M. Sianipar
    Dept: School of Business and Management,
    Institut Teknologi Bandung,
    Indonesia
  • Assist. Prof. Dr. Mohamed Ramadan
    Dept: Mechanical Engineering Dept.,
    University of Hail,
    Saudi Arabia
  • Assist. Prof. Dr. Naglaa Fathy
    Dept: Physics Dept.,
    College of Science, University of Hail,
    Saudi Arabia
  • Dr. Jameel Habeeb Ghazi Al-imari
    Dept: Metallurgical Engineering,
    Babylon University/College of Materials Engineering,
    Iraq
  • Assist. Prof. Dr. Anil Kumar
    Dept: Dept. of Energy,
    Maulana Azad National Institute of Technology, Bhopal,
    India
  • Assoc. Prof. Dr. Dr. Sushil Kumar Jain
    Dept: Department of Physics,
    Manipal University Jaipur,
    India
  • Dr. Othman Inayatullah
    Dept: Mechanical and Manufacturing Engineering Faculty of Engineering,
    Universiti Putra Malaysia,
    Malaysia
  • Assist. Prof. Dr. Hirotaka Sato
    Dept: Mechanical & Aerspace Engineering,
    Nanyang Technological University,
    Singapore
  • Assist. Prof. Dr. Taib Iskandar Mohamad
    Dept: Mechanical Engineering Technology,
    Yanbu Industrial College,
    Saudi Arabia
  • Prof. Dr. Senthil Kumar Karuppiah
    Dept: Mechanical Engineering,
    SKP Institute of Technology,
    India
  • Assist. Prof. Dr. Nitin Kumar Sharma
    Dept: Mechanical Engineering,
    The Glocal University, Saharanpur,
    India
  • Assist. Prof. Dr. Rogelio, Jr Golez
    Dept: Mechanical Engineering,
    Xavier University,
    Phillipines
  • Prof. Dr. RAMAKRISHNA HEGDE
    Dept: MECHANICAL ,
    SRINIVAS INSTITUTE OF TECHNOLOGY,
    India
  • Assist. Prof. Dr. WAN AHMAD YUSMAWIZA WAN YUSOFF
    Dept: INDUSTRIAL SYSTEMS ENGINEERING,
    UNIVERSITY OF HAIL,
    Saudi Arabia
  • Assist. Prof. Dr. Hasan AYDOGAN
    Dept: Mechanical Engineering,
    Selcuk University,
    Turkey
  • Assist. Prof. Dr. M.J. Kazemzadeh-Parsi
    Dept: Mechanical Engineering,
    Shiraz Branch, Islamic Azad University,
    Iran
  • Dr. Pramod Kumar
    Dept: Mechanical Engineering,
    NIT Jalandhar,
    India
  • Assist. Prof. Dr. RAJENDRA KUMAR DUCHANIYA
    Dept: METALLURGICAL AND MATERIALS ENGINEERING,
    MALAVIYA NATIONAL INSTITUTE OF TECHNOLOGY JAIPUR,
    India
  • Assist. Prof. Dr. Syed Mehmood Hasan
    Dept: Deptt. of Industrial & Manufacturing Engineering,
    NED University of Engineering & Technology,
    Pakistan
  • Assist. Prof. Dr. Abakh Darestani Soroush
    Dept: Manufacturing Engineering,
    University Malaysia PAHANG,
    Malaysia
  • Prof. Dr. DEVINDER SINGH PATHANIA
    Dept: Mathematics,
    Guru Nanak Dev Engg.College LUDHIANA(PUNJAB),
    India
  • Prof. Dr. Mohammed Jasim Kadhim Al-Tameemi
    Dept: Production Engineering and Technology,
    Univ. of Technology,
    Iraq
  • Prof. Dr. Maher Nofal
    Dept: Mechanical Engineering,
    Taibah University,
    Saudi Arabia
  • Prof. Dr. Balasubramanian
    Dept: Mechanical Engineering,
    Dr.MGR Educational and Research Institute University,
    India
  • Dr. Jayakumar
    Dept: Mechanical and Industrial Engineering,
    Ibri College of Technology,
    Oman
  • Assoc. Prof. Dr. Ravi Kumar Dwivedi
    Dept: Mechanical Engineering,
    Maulana Azad National Institute of Technology,
    India
  • Prof. Dr. INDER KUMAR SHARMA
    Dept: MECHANICAL,
    SKYLINE INSTITUTE OF ENGINEERING & TECHNOLOGY,
    India
  • Assist. Prof. Dr. Morteza Bagherpour
    Dept: Industrial Eng.,
    Iran University of Science and Tech.,
    Iran
  • Assist. Prof. Dr. Meisam Mohammadi Amin
    Dept: Mechanical engineering,
    Aerospace Research Institute,
    Iran
  • Prof. Dr. Osman Adiguzel
    Dept: Physics,
    Firat University,
    Turkey
  • Dr. Ahmad Yusairi Bani Hashim
    Dept: Department of Robotics & Automation,
    Universiti Teknikal Malaysia Melaka,
    Malaysia
  • Prof. Dr. Park Sangchul
    Dept: Industrial Engineering,
    Ajou University,
    South Korea
  • Dr. Masoud Rahiminezhad Galankashi
    Dept: Manufacturing and Industrial Engineering,
    Universiti Teknologi Malaysia,
    Malaysia
  • Dr. Waleed Ahmed
    Dept: ERU,
    UAE University,
    United Arab Emirates
  • Dr. Mohd Hadzley Abu Bakar
    Dept: Department of Manufacturing Process,
    Universiti Teknikal Malaysia Melaka,
    Malaysia
  • Dr. Bukhari Manshoor
    Dept: Faculty of Mechanical and Manufacturing Engineering,
    Universiti Tun Hussein Onn Malaysia,
    Malaysia
  • Prof. Dr. Osman Adiguzel
    Dept: Physics,
    Firat University,
    Turkey
  • Prof. Dr. Hoon Kiat Ng
    Dept: Department of Mechanical, Materials and Manufacturing Engineering,
    The University of Nottingham Malaysia Campus,
    Malaysia
  • Assist. Prof. Dr. Obai younis
    Dept: Mechanical Eng.,
    Univerity of Khartoum,
    Sudan
  • Dr. Bukhari Manshoor
    Dept: Faculty of Mechanical and Manufacturing Engineering,
    Universiti Tun Hussein Onn Malaysia,
    Malaysia
  • Dr. Irza Sukmana
    Dept: Mechanical Engineering,
    University of Lampung,
    Indonesia
  • Dr. Ferry Jie
    Dept: School of Business IT and Logistics,
    RMIT University,
    Australia
  • Assist. Prof. Dr. MUHAMMAD WASIF
    Dept: Department of Industrial and Manufacturing Engineering,
    NED University of Engineering & Technology, Karachi,
    Pakistan
  • Assist. Prof. Dr. CheeFai Tan
    Dept: Mechanical engineering,
    Universiti teknikal malaysia melaka,
    Malaysia
  • Dr. Shankar Chelliah
    Dept: School of Management,
    Universiti Sains Malaysia,
    Malaysia
  • Assist. Prof. Dr. Philip Ermita
    Dept: College of Engineering, Architecture, and Technology,
    De La Salle University -Dasmariñas,
    Phillipines
  • Prof. Dr. K. Palanikumar
    Dept: Mechanical Engineering,
    Sri Sai Ram Institute of Technology,
    India
  • Assist. Prof. Dr. Nattaphan Kecharananta
    Dept: Graduate School,
    Suan Dusit Rajabhat University,
    Thailand
  • Assist. Prof. Dr. Muhammad Adil Khattak
    Dept: Mechanical Engineering,
    Universiti Teknologi Malaysia,
    Malaysia
  • Dr. AMIR AZIZI
    Dept: Faculty of Manufacturing Engineering,
    Univerisit Malaysia Pahang,
    Malaysia
  • Assist. Prof. Dr. Sivasankaran S
    Dept: Institute of Mathematical Sciences,
    University of Malaya,
    Malaysia
  • Assoc. Prof. Dr. Ahmed Aly Diaa Sarhan
    Dept: Mechanical Eng,
    University of Malaya,
    Malaysia
  • Assist. Prof. Dr. Sivasankaran Sivanandam
    Dept: Institute of Mathematical Sciences,
    University of Malaya,
    Malaysia
  • Prof. Dr. Shreekant Tare
    Dept: Mechanical,
    S D Institute of Technology & Science ,
    India
  • Assist. Prof. Dr. Kim Yeow Tshai
    Dept: Mechanical, Materials and Manufacturing Engineering,
    University of Nottingham,
    Malaysia
  • Prof. Dr. Imran Ali Chaudhry
    Dept: Department of Industrial Engineering,
    National University of Sciences & Technology,
    Pakistan
  • Assoc. Prof. Dr. Christopher Enweremadu
    Dept: Mechanical and Industrial Engineering,
    University of South Africa,
    South Africa
  • Prof. Dr. ANIL BISEN
    Dept: Mechanical Engineering,
    MATS University, Raipur ( C.G.),
    India
  • Assoc. Prof. Dr. Shahruddin Mahzan
    Dept: Faculty of Mechanical and Manufacturing Engineering,
    Universiti Tun Hussein Onn Malaysia,
    Malaysia
  • Assoc. Prof. Dr. Mohamed Emara
    Dept: Manufacturing Engineering,
    Canadian International College (CIC),
    Egypt
  • Prof. Dr. Janaki Ramulu Perumalla
    Dept: Mechanical Engineering,
    Vardhaman College of Engineering,
    India
  • Dr. Mohan Kumar Pradhan
    Dept: Mechanical Engineering ,
    Maulana Azad National Institute of Technology, Bhopal,
    India
  • Assist. Prof. Dr. Babaa Moulay Rachid
    Dept: Chemical Engineering,
    Nazarbayev University,
    Kazakhstan
  • Dr. Ravi Sankar Bhuvanagiri
    Dept: Mechanical Engineering,
    R.V.R & J.C. COLLEGE OF ENOGINEERING,
    India
  • Prof. Dr. Valentina Pomazan
    Dept: Mechanical Engineering Faculty,
    Ovidius University Constanta,
    Romania
  • Prof. Dr. mohammed Al-Tameemi
    Dept: Production EWngineering and Metallurgy,
    Univ. of Technology,
    Iraq
  • Prof. Dr. barbara marchetti
    Dept: facoltà di ingegneria,
    Università degli Studi eCampus,
    Italy
  • Dr. J SADHIK BASHA BASHA
    Dept: Mechanical Engineering,
    King Khalid University, Kingdom of Saudi Arabia,
    India
  • Assist. Prof. Dr. Lingaraju Dumpala
    Dept: Mechanical Engg Department,
    JNT University Kakinada,
    India
  • Assist. Prof. Dr. vipul vibhanshu
    Dept: Mechanical Engineering,
    Krishna Institute of Engineering And Technology,
    India
  • Assoc. Prof. Dr. Florin Negoescu
    Dept: MACHINE MANUFACTURING TECHNOLOGY,
    GHEORGHE ASACHI TECHNICAL UNIVERSITY OF IAÅžI,
    Romania
  • Prof. Dr. Imran Ali Chaudhry
    Dept: Department of Industrial Engineering,
    National University of Sciences & Technology,
    Pakistan
  • Prof. Dr. SURESH KUMAR
    Dept: Mechanical Engineering,
    PDM College of Engineering,
    India
  • Prof. Dr. RAJA BALAYANAN SR
    Dept: Mechanical Engg,
    Professor and Head/Mechanical Engg.Hindusthan Institute of Technology,
    India
  • Dr. Chockalingam Aravind Vaithilingam
    Dept: Electrical Engineering,
    Taylors University,
    Malaysia
  • Dr. Farooq Ahmad Najar
    Dept: Tribology,
    National Institute of Technology, Kashmir,
    India
  • Dr. SIDDHARTHA SANKAR KAUSIK
    Dept: DUSTY PLASMA LABORATORY,
    CENTRE OF PLASMA PHYSICS, INSTITUTE FOR PLASMA RESEARCH,
    India
  • Prof. Dr. Kamiel Gabriel
    Dept: mechanical and manufacturing engineering,
    University of Ontario Institute of Technology,
    Canada
  • Assist. Prof. Dr. Metin Zeyveli
    Dept: Mechatronics and Mechanical Engineering,
    Karabuk University,
    Turkey
  • Dr. Thanya Parametthanuwat
    Dept: Department of of Machinery,
    King Mongkut University of Technology North Bangkok,
    Thailand
  • Prof. Dr. ROBINSON Y
    Dept: MECHANICAL ENGINEERING,
    RVS TECHNICAL CAMPUS - COIMBATORE,
    India
  • Assist. Prof. Dr. Surafel Tilahun
    Dept: Computational Science,
    Addis Ababa University,
    Ethiopia
  • Dr. vinod kumar v
    Dept: MECHANICAL ENGINEERING ,
    KAKATIYA INSTITUTE OF TECHNOLOGY & SCIENCE, WARANGAL,
    India
  • Prof. Dr. Dalah Mohamed
    Dept: Department of Mathematics,
    University Constantine 1, Faculty of Sciences,
    Algeria
  • Assist. Prof. Dr. Haytham El-Zomor
    Dept: Mechanical Engineering,
    Higher Technological Institute,
    Egypt
  • Assist. Prof. Dr. Fethma M.Nor
    Dept: Department of Mechanics Engineering,
    Universiti Tun Hussein Onn Malaysia,
    Malaysia
  • Assist. Prof. Dr. Mohamed Mohamed
    Dept: Mechanical Engineering,
    Helwan University, Faculty of Engineering,
    Egypt
  • Assist. Prof. Dr. Imed Miraoui
    Dept: Mechanical Department,
    Aljouf University, College of Engineering,
    Saudi Arabia
  • Dr. MOHAMMAD HARITH BIN AMLUS HARITH
    Dept: Technology ,
    UNIMAP,
    Malaysia
  • Prof. Dr. S.K. Sadrnezhaad
    Dept: Materials Science and Engineering,
    Sharif University of Technology,
    Iran
  • Assist. Prof. Dr. Ezzatallah Baloui Jmakhaneh
    Dept: Statistics,
    Islamic Azad University,
    Iran
  • Assoc. Prof. Dr. SADAF ZAIDI
    Dept: Chemical Engineering,
    Aligarh Muslim University, Aligarh, India,
    India
  • Prof. Dr. PARBHUBHAI TAILOR
    Dept: MECH.ENGG.,
    S.V.NATIONAL INSTITUTE OF TECHNOLOGY,
    India
  • Assoc. Prof. Dr. Yusri Yusof
    Dept: Faculty of Mechanical and Manufacturing Engineering,
    Universiti Tun Hussein Onn Malaysia (UTHM),
    Malaysia
  • Assoc. Prof. Dr. Rizalman Mamat
    Dept: Faculty of Mechanical Engineering,
    Universiti Malaysia Pahang,
    Malaysia
  • Assist. Prof. Dr. Sachin K. Patil
    Dept: Mechanical Engineering Department,
    RIT, Rajaramnagar,
    India
  • Assist. Prof. Dr. Akshoy Ranjan Paul
    Dept: Applied Mechanics,
    Motilal Nehru National Institute of Technology Allahabad,
    India
  • Prof. Dr. Kunwar Laiq Ahmad Khan
    Dept: Mechanical Engineering,
    Krishna Institute of Engineering And Technology,
    India
  • Prof. Dr. M. K. Pradhan
    Dept: Mechanical Engineering Department,
    Maulana Azad National Institute of Technology, Bhopal, India.,
    India
  • Assist. Prof. Dr. Hassan Osman
    Dept: Mechanical Engineering,
    Sudan University of Science and Technology,
    Sudan
  • Prof. Dr. Janaki Ramulu Perumalla
    Dept: Mechanical Engineering,
    Vardhaman College of Engineering,
    India
  • Prof. Dr. MUKESH KANUNGO
    Dept: MECHANICAL ENGINEERING,
    SURABHI & SATYAM GROUP OF INSTITUTIONS, BHOPAL (M.P) INDIA,
    India
  • Assist. Prof. Dr. APPASO GADADE
    Dept: Mechanical Engg.,
    AIT Pune,
    India
  • Dr. Shahryar Sorooshian
    Dept: Industrial Management,
    University Malaysia Pahang,
    Malaysia
  • Dr. Mohammad Reza Safaei
    Dept: Mechanical Engineering,
    University of Malaya,
    Malaysia
  • Prof. Dr. S.Prakash
    Dept: Mechanical Engineering,
    Sathyabama University,
    India
  • Dr. Songlin Ding
    Dept: School of Aerospace, Mechanical and Manufacturing,
    RMIT University,
    Australia
  • Prof. Dr. K.Viswanatha Sharma Korada
    Dept: Mechanical,
    Universiti Teknologi Petronas,
    Malaysia
  • Assist. Prof. Dr. Moslem Yousefi
    Dept: mechanical engineeing ,
    University Tenaga Nasional,
    Malaysia
  • Assist. Prof. Dr. Manoj Sahni
    Dept: Mathematics and Computer Science,
    Pandit Deendayal Petroleum University, Gandhinagar,
    India
  • Dr. MUHAMMAD SARWAR
    Dept: Quality,
    ALSTOM Power,
    Switzerland
  • Assist. Prof. Dr. SHAHUL HAMID KHAN
    Dept: Mechanical Engineering,
    Indian Institute of Information Technology, Design & Manufacturing,
    India
  • Dr. Nandipati Govind
    Dept: Mechanical Engineering,
    RVR & JC College of Engineering,
    India
  • Assist. Prof. Dr. Pravin Khope
    Dept: Mechanical Engineering,
    Priyadarshini College of Engineering, Nagpur,
    India
  • Dr. Harun Sarip
    Dept: UniKL-MICET,
    Universiti Kuala Lumpur,
    Malaysia
  • Prof. Dr. Mohan Kumar Gabriel
    Dept: Mechanical Engineering,
    Park College of Engineering and Technology,
    India
  • Assoc. Prof. Dr. THIAGARAJAN KITTAPPA
    Dept: SCIENCE AND HUMANITIES ( MATHEMATICS),
    PSNA COLLEGE OF ENGG AND TECHNOLOGY, DINDIGUL, INDIA.,
    India
  • Dr. Radha Krishna Lal
    Dept: Mechanical Engineering,
    Indian Institute of Technology (Banaras Hindu University), Varanasi,
    India
  • Assist. Prof. Dr. Predrag Dasic
    Dept: Production Engineering,
    High Technical Mechanical School of Proffesional Studies,
    Serbia
  • Prof. Dr. Anil Singh Yadav
    Dept: Mechanical Engineering Department,
    Technocrats Institute of Technology-Excellence, Bhopal MP, India,
    India
  • Dr. EIDA NADIRAH ROSLIN
    Dept: Automotive Engineering,
    Universiti Kuala Lumpur, Malaysia France Institute,
    Malaysia
  • Dr. REMICA AGGARWAL
    Dept: MANAGEMENT,
    BITS PILANI,
    India
  • Assist. Prof. Dr. Shahriar Kouravand
    Dept: Agrotechnology,
    University of Tehran,
    Iran
  • Prof. Dr. Malay Banerjee
    Dept: Metallurgical and Materials Engg.,
    Malaviya National Institute of Technology,
    India
  • Prof. Ajay Mishra
    Dept: MECHANICAL ENGINEERING,
    Oriental University, Indore,
    India
  • Assoc. Prof. Dr. JANCIRANI J
    Dept: AUTOMOBILE ENGINEERING,
    MIT CAMPUS, ANNA UNIVERSITY,
    India
  • Dr. prof.koorapati eshwara prasad KOORAPATI
    Dept: Mechanical Engineering,
    JNTUH-College of Engineering,
    India
  • Assoc. Prof. Dr. El-sayed El-Agouz
    Dept: Mechanical Power Engineering,
    Faculty of Engineering, Tanta University,
    Egypt
  • Assoc. Prof. Dr. NVN INDRA KIRAN
    Dept: MECHANICAL ,
    ANITS,
    India
  • Assoc. Prof. Dr. Naveen Beri
    Dept: Mechanical Engineering,
    Beant College of Engg. & Tech.,,
    India
  • Prof. Dr. Uddhav Shirsat
    Dept: Mechanical Engineering,
    Navsahyadri Education Society, Faculty of Engineering,
    India
  • Prof. Dr. Hitesh panchal
    Dept: Mechanical,
    GPERI,
    India
  • Prof. Dr. Osman Adiguzel
    Dept: Physics,
    Firat University,
    Turkey
  • Assist. Prof. Dr. Monon Mahboob
    Dept: Mechanical Engineering,
    BUET,
    Bangladesh
  • Dr. Morteza Mohammadzaheri
    Dept: Mechanical Engineering,
    Texas A&M University at Qatar,
    Qatar
  • Dr. Reza Abdi Behnagh
    Dept: Mechanical Engineering,
    Urmia University of Technology,
    Iran
  • Dr. Edmond Hoxha
    Dept: Mineral Resources,
    Faculty of Geology and Mine,
    Albania
  • Prof. Dr. K.Balasubramanian
    Dept: Mechanical Engineering,
    Vel Tech (owned by RS Trust),
    India
  • Prof. Dr. Valentina Pomazan
    Dept: Mechanical Engineering Faculty,
    Ovidius University of Constanța,
    Romania
  • Dr. MANOJ SAHNI
    Dept: Mathematics and Computer Science,
    Pandit Deendayal Petroleum University, Gandhinagar,
    India
  • Dr. Taki Ahmada Taam
    Dept: chemical and food engineering ,
    Engineering & technology,
    Comoros
  • Assist. Prof. Dr. Nawal hussein Balal Siddig Nawal Siddig
    Dept: Mathematics,
    ahfad University for Women,
    Sudan
  • Assoc. Prof. Dr. Ashwani Kumar
    Dept: Mechanical,
    Dronacharya Group of Institutions,
    India
  • Assoc. Prof. Dr. Dattatraya Bhise
    Dept: Mechanical,
    Dronacharya Group of Institutions, Greater Noida,
    India
  • Prof. Dr. ARINDAM GHOSAL
    Dept: MECHANICAL ENGINEERING,
    Dronacharya Group of Institutions, Greater Noida, U.P (India),
    India
  • Prof. Dr. Motahar Reza
    Dept: Department of Mathematics and Computing,
    National Institute of Science & Technology,
    India
  • Prof. Dr. prakash subramanaiam
    Dept: Mechanical Engineering,
    sathyabama university,chennai 600119,
    India
  • Prof. Dr. Hanumantharao Dharwada
    Dept: Mechanical Engineering,
    Matrusri Engineering College,
    India
  • Dr. PRABHUDEV Shaikroza
    Dept: Mechanical Engineering,
    Department Of Mechanical Engineering, Governement polytechnic, Gulbarga-585 312,
    India
  • Prof. Dr. N.Ethiraj
    Dept: Mechanical Engineering,
    Dr.M.G.R Educational and Research Institute-University,
    India
  • Assoc. Prof. Dr. Fatemeh Almasi
    Dept: Industrial Engineering and management systems ,
    AmirKabir University of Technology(Tehran polytechnic),
    Iran
  • Assoc. Prof. Dr. KUMARASWAMIDHAS LAKSHMI ANNAMALAI
    Dept: MINING MACHINERY,
    INDIAN SCHOOL OF MINES,
    India
  • Assist. Prof. Dr. Gulsen Akman
    Dept: Industrial Engineering,
    Kocaeli University,
    Turkey
  • Assist. Prof. Dr. Ajay Verma
    Dept: Mechanical Engineering,
    Maulana Azad National Institute of Technology, Bhopal,
    India
  • Dr. Taki Ahmada Taam
    Dept: chemical and food engineering ,
    Gezira Univercity ,
    Comoros
  • Prof. Dr. Hitesh Panchal
    Dept: Mechanical,
    GPERI,
    India
  • Assist. Prof. Dr. Manar Eltantawie
    Dept: Mechanical Engineering,
    Higher Technological Institute,
    Egypt
  • Dr. Waleed Ahmed
    Dept: College of Engineering,ERU and Mechanical Department,
    UAE University,
    United Arab Emirates
  • Assoc. Prof. Dr. RAMESHAIAH G N
    Dept: Chemical Engineering,
    B M S College of Engineering,
    India
  • Assist. Prof. Dr. Setyamartana Parman
    Dept: Mechanical Engineering,
    Universiti Teknologi PETRONAS,
    Malaysia
  • Assist. Prof. Dr. Alexander Chesnokov
    Dept: Computer science ,applied mathematics and their teaching methods,
    samara state academy of social sciences and humanities,
    Russia
  • Dr. Alper Uysal
    Dept: Department of Mechanical Engineering,
    Yıldız Technical University,
    Turkey
  • Assoc. Prof. Dr. PIYUSH GOHIL
    Dept: Mechanical Engineering,
    Faculty of Technology & Engineering,
    India
  • Prof. Dr. MURALI KRISHNA BARATAM
    Dept: MECHANICAL,
    VITS college of engg,
    India
  • Assoc. Prof. Dr. Ajender kumar Malik
    Dept: Mathematics ,
    B K Birla Institute of Engineering and Technology, Pilani Rajsthan ,
    India
  • Assist. Prof. Dr. Sachin Tejyan
    Dept: Mechanical Engineering,
    Maharaja Agrasen University, Baddi (H.P.),
    India
  • Dr. sterkenburg ronald
    Dept: Aviation,
    Purdue University,
    United States
  • Assist. Prof. Dr. RADHA KRISHNA LAL
    Dept: MECHANICAL ENGINEERING,
    MADAN MOHAN MALAVIYA UNIVERSITY OF TECHNOLOGY GORAKHPUR,
    India
  • Prof. Dr. SRINIVASA RAO P
    Dept: MECHANICAL ENGINEERING,
    CENTURION UNIVERSITY,
    India
  • Assoc. Prof. Dr. Taghipour Atour
    Dept: Faculty of International Business,
    University of Le Havre,
    France
  • Assoc. Prof. Dr. Wen-Jong Chen
    Dept: Dept. of Industrial Education and Technology,
    National Changhua University of Education,
    Taiwan
  • Prof. Dr. Geraldzep Geraldzep
    Dept: Cultural Sciences,
    ,
    South Korea
  • Dr. Sukhraj Singh
    Dept: Mechanical Engineering Deptt.,
    ACET, Amritsar, Punjab (INDIA),
    India
  • Assist. Prof. Dr. ABHISHEK SINGH
    Dept: Mechanical Engineering ,
    National Institute of Technology Patna ,
    India
  • Assoc. Prof. Dr. P S Rama Sreekanth
    Dept: Mechanical Engineering,
    Ntional Institute of Science and Technology,
    India
  • Dr. MUHAMMAD SARWAR
    Dept: Construction & Commissioning - QUALIT,
    ALSTOM POWER,
    Switzerland
  • Assist. Prof. Dr. Vijay Santhiyagu Joseph
    Dept: Department of Mechanical Engineering,
    Karunya University,
    India
  • Dr. Bhuvaneswari Marimuthu
    Dept: Mechanical Engineering,
    University of Malaya,
    Malaysia
  • Assoc. Prof. Dr. Adnan Shariah
    Dept: Applied Physics,
    Jordan University of Science and Technology,
    Jordan
  • Prof. Dr. RAVI GOYAL
    Dept: Mechanical Engineering,
    Jaipur Institute of Technology-Group of Institutions,
    India
  • Assist. Prof. Dr. Abdullah Korkut Ustun
    Dept: industrial engineering,
    Aksaray University,
    Turkey
  • Prof. Dr. Suryanarayana Murthy Chivukula
    Dept: Mining Engineering,
    National Institute Of Technology Karnataka, Surathkal ,
    India
  • Prof. Dr. CHIKKANNA NAGANNA
    Dept: Mechanical ,
    Visvesvaraya Technological University, Belagavi,Karanataka,India,
    India
  • Assoc. Prof. Dr. Norzima Zulkifli
    Dept: Mechanical & Manufacturing Eng.,
    Universiti Putra Malaysia,
    Malaysia
  • Assist. Prof. Dr. Vimalkumar Patel
    Dept: Mechanical Engineering ,
    Government Engineering College, Bharuch,
    India
  • Assoc. Prof. Dr. Sadigh Raissi
    Dept: Ph.D. department of Industrial Engineering,
    Azad University, South Tehran Branch,
    Iran
  • Assist. Prof. Dr. Devendra Singh
    Dept: Mechanical Engineering,
    SRM University,
    India
  • Dr. Ojo Sunday Fayomi
    Dept: Department of Chemical, Metallurgical and Materials Engineering,
    Tshwane University of Technology,
    Nigeria
  • Dr. VICTOR SUNDAY
    Dept: Chemical, Metallurgical and Materials Engineering,
    Tshwane University of Technology,
    South Africa
  • Dr. Husain Kanchwala
    Dept: Mechanical,
    Indian Institute of Technology Kanpur,
    India
  • Prof. Dr. Premanand Singh Chauhan
    Dept: Mechanical Engineering,
    IPS College of Technology and Management,
    India
  • Dr. Mohammed Mahmoud Mohammed Aish
    Dept: Physics Department,,
    Faculty of Science, Menoufia University, Egypt,
    Egypt
  • Dr. Moslem Yousefi
    Dept: Mechanical engineering ,
    Universiti Tenaaga Nasional,
    Malaysia
  • Assist. Prof. Dr. Philip Ermita
    Dept: Engineering Department,
    University of Perpetual Help ,
    Phillipines
  • Assist. Prof. Dr. Muthuramalingam T
    Dept: Mechatronics,
    SRM University,
    India
  • Prof. Dr. SHOBHA LATA SINHA
    Dept: Mechanical Engineering,
    NATIONAL IINSTITUTE OF TECHNOLOGY, RAIPUR, CG.,
    India
  • Assist. Prof. Dr. Pawan Sharma
    Dept: Mechanical Engineering,
    Vivekananda Institute of Technology (East),
    India
  • Assoc. Prof. Dr. Smriti Khatri
    Dept: Pharmacy,
    Ram-Eesh Institute of Vocational and Technical Education,
    India
  • Assist. Prof. Dr. Radha Krishna Lal
    Dept: Mechanical Engineering,
    Madan Mohan Malaviya University of Technology, Gorakhpur,
    India
  • Assoc. Prof. Dr. Norzima Zulkifli
    Dept: Mechanical and Manufacturing Engineering,
    Universiti Putra Malaysia,
    Malaysia
  • Prof. Dr. MM.RAVIKUMAR
    Dept: MECHANICAL,
    principal,RAAK COLLEGE OF ENGINEERING AND TECHNOLOGY,
    India
  • Dr. PALANISAMY SIVAPRAKASH
    Dept: Department of Mechanical Engineering,
    A.S.L.Pauls College of Engineering and Technology,
    India
  • Assoc. Prof. Dr. Jambulingam Subramani
    Dept: Statistics,
    Pondicherry University,
    India
  • Dr. Andrew Eloka-Eboka
    Dept: Mechanical Engineering,
    University of KwaZulu-Natal,
    South Africa
  • Dr. Ibrahim Dauda Muhammad
    Dept: Mechanical Engineering,
    University of Abuja,
    Nigeria
  • Assoc. Prof. Dr. Hasan AYDOGAN
    Dept: Mechanical Engineering Department,
    Selcuk University, Technology Faculty,
    Turkey
  • Assist. Prof. Dr. Haytham El-Zomor
    Dept: Mechanical Engineering,
    Higher Technological Institute,
    Egypt
  • Prof. Dr. Krishna Mohana Rao Gurram
    Dept: Mechanical Engineering,
    JNTUH College of Engineering,
    India
  • Dr. J. SADHIK BASHA
    Dept: Mechanical Engineering,
    International Maritime College Oman,
    India
  • Assoc. Prof. Dr. Mohammad Ameri
    Dept: Mechanical & Energy Eng.,
    Shahid Beheshti University (Formerly Power & Water University of Technology),
    Iran
  • Assist. Prof. Dr. ANKUSH ANAND
    Dept: MECHANICAL ENGINEERING,
    SMVD UNIVERSITY KATRA J&K,
    India
  • Dr. SMRUTI REKHA DASH
    Dept: Ceramic Engg,
    NIT Rourkela,
    India
  • Assoc. Prof. Dr. Anshuman Srivastava
    Dept: Mechanical Engineering,
    AIMT Lucknow,
    India
  • Assist. Prof. Dr. A. Dinesh
    Dept: Mathematical Modelling & Stochastic Modelling,
    DHANALAKSHMI SRINIVASAN ENGINEERING COLLEGE, Tamil Nadu,
    India
  • Assist. Prof. Dr. Habib GÜRBÜZ
    Dept: Automotive Engineering,
    Süleyman Demirel University,
    Turkey
  • Prof. Dr. SRINIVASAN sp
    Dept: mechanical engineering,
    RAJALAKSHMI ENGINEERING COLLEGE,
    India
  • Mr. RONALD GOMESERIA
    Dept: MEP,
    ARCADIS/Hyder Consulting,
    Qatar
  • Prof. Dr. Ill-Soo Kim
    Dept: Mechanical Engineering,
    Mokpo National University,
    South Korea
  • Dr. PARDEEP KUMAR SOOD
    Dept: Mechanical Engineering,
    National Insistute of Technology Hamirpur (HP),
    India
  • Assoc. Prof. Dr. Ashwani Kumar Dhingra
    Dept: Mechanical Engineering,
    Maharshi Dayanand University Rohtak,
    India
  • Prof. Dr. Said BENRAMACHE
    Dept: Materials Science,
    university of biskra, algeria,
    Algeria
  • Prof. Dr. GAJANANA SAPAREY
    Dept: Mechanical Engineering,
    MVSR Engineering College,
    India
  • Prof. Dr. AHMED ALJANABI
    Dept: MECHANICAL ENGINEERING,
    ALNAHRAIN UNIVERSITY,
    Iraq
  • Assist. Prof. Dr. R.KANDASAMY RAGUPATHY P
    Dept: mechanical,
    selvam college of technology,
    India
  • Assist. Prof. Dr. KANNAN P PERIYASAMY K
    Dept: mechanical,
    selvam college of technology,
    India
  • Assist. Prof. Dr. DINESKUMAR R RAJU
    Dept: mechanical,
    selvam college of technology,
    India
  • Assoc. Prof. Dr. SIRAJUDEEN I SIRAJ
    Dept: mechanical,
    selvam college of technology,
    India
  • Assoc. Prof. Dr. SATHEESHKUMAR P PONNUSAMY R
    Dept: mechanical,
    selvam college of technology,
    India
  • Assoc. Prof. Dr. Sidhartha sankar Panda
    Dept: Post Graduate Department of Physics,
    Berhampur University,
    India
  • Prof. Dr. El Sayed El Agouz El Agouz
    Dept: Mechanical Power Engineering,
    Tanta university,
    Egypt
  • Assoc. Prof. Dr. SAMEER SHARMA
    Dept: MATHEMATUCS,
    DAV COLLEGE JALANDHAR,
    India
  • Dr. MEERAVALI SHAIK
    Dept: MBA,
    RISEKRISHNA SAI PRAKASAM GROUPS OF INSTITUTIONS,
    India
  • Dr. Ali Ahmadian
    Dept: Department of Mathematics,
    Universiti Putra Malaysia,
    Malaysia
  • Assist. Prof. Dr. PADMANAVA SAMANTA
    Dept: P.G DEPARTMENT OF MATHEMATICS,
    BERHAMPUR UNIVERSITY,
    India
  • Assoc. Prof. Dr. Rabinder Singh Bharj
    Dept: Mechanical Engineering,
    Dr B R Ambedkar National Institute of Technology,
    India
  • Assoc. Prof. Dr. JYOTI BHARJ
    Dept: Physics,
    Dr B R Ambedkar National Institute of Technology, Jalandhar,
    India
  • Dr. Kausalyah Venkatason
    Dept: Faculty of Mechanical Engineering,
    Universiti Teknologi MARA,
    Malaysia
  • Assoc. Prof. Dr. Shasthri Sivaguru
    Dept: Mechanical Engineering,
    Heriot Watt University Malaysia,
    Malawi
  • Prof. Dr. Srinivasan.A.G
    Dept: Mathematics,
    Dr.M.G.R.Educational and Research Institute,
    India
  • Mr. Priyadarshi Biplab Kumar
    Dept: Mechanical Engineeing,
    National Institute of Technology, Rourkela,
    India
  • Assist. Prof. Dr. Dilmurat Azimov
    Dept: Department of Mechanical Engineering,
    University of Hawaii at Manoa,
    United States
  • Dr. Jaykumar Vora
    Dept: Mechanical Engineering department,
    Pandit Deendayal Petroleum university,
    India
  • Mr. Jaimon Quadros
    Dept: Mechanical Engineering,
    Birla Institute of Technology, Offshore campus,
    United Arab Emirates
  • Prof. Dr. Ajit Kumar Senapati
    Dept: Mechanical Engineering,
    Gandhi Institute Of Engineering And Technology,
    India
  • Assoc. Prof. Dr. Reddappa Hosur Nanji Reddy
    Dept: Mechanical Engineering,
    Bangalore Institute of Technology,
    India
  • Assoc. Prof. Dr. A.Thiagarajan
    Dept: Mechanical Engineering,
    Sri Manakula Vinayagar Engineering College,
    India
  • Assist. Prof. Dr. M. S. Senthil Kumar
    Dept: Industrial Engineering,
    Dire Dawa University,
    Ethiopia
  • Prof. Dr. Sasikumar
    Dept: Department of Mechanical Engineering,
    KPR Institute of Engineering and Technology,
    India
  • Prof. Dr. Hui Ming Wee
    Dept: Industrial & Systems Engineering,
    Chung Yuan Christian University,
    Taiwan
  • Dr. Dipen Kumar Rajak
    Dept: Department of Mining Machinery Engineering,
    Indian Institute of Technology (ISM) Dhanbad,
    India
  • Assist. Prof. Dr. RAJKUMAR SIVANRAJU
    Dept: School of Mechanical & Electromechanical Engineering,
    Hawassa University,
    Ethiopia
  • Assist. Prof. Dr. Muhammad Wasif Muhammad
    Dept: Industrial and Manufacturing Engineering,
    NED University of Engineering and Technology,
    Pakistan
  • Dr. SABIN KUMAR MISHRA
    Dept: Mechanical & Mechatronics,
    Higher Colleges of Tech ology,
    United Arab Emirates
  • Assoc. Prof. Dr. Ashish Kumar
    Dept: Chemistry,
    Lovely Professional University,
    India
  • Dr. Rashid Pourrajab
    Dept: Department of Mechanical Engineering,
    Shohadaye Hoveizeh University of Technology,
    Iran
  • Dr. Rajeswara Reddy Erva
    Dept: Biotechnology,
    VIGNAN'S University,
    India
  • Prof. Dr. MOHAMED ELAJRAMI
    Dept: Mechanical Department,
    University Djillali Liabes of Sidi Bel Abbes,
    Algeria
  • Prof. Dr. SUSHANTA TRIPATHY
    Dept: KIIT University,
    KIIT University,
    India
  • Prof. Dr. Adel K., Mahmoud
    Dept: Mechanical Engineering Department,
    University of Diyala,
    Iraq
  • Prof. Dr. Adel K. Mahmoud
    Dept: Mechanical Engineering Dept.,
    University of Diyala,
    Iraq
  • Assoc. Prof. Dr. Naglaa Fathy
    Dept: Physics,
    University of Hail,
    Saudi Arabia
  • Dr. Anoop Kumar Shukla
    Dept: Mechanical Engineering,
    Harcourt Butler Technical University,
    India
  • Assist. Prof. Dr. Jegathambigai Rameshwar Naidu
    Dept: Biochemistry, Faculty of Medicine,
    Asia Metropolitan University,
    Malaysia
  • Prof. Dr. Praveen Pachauri
    Dept: Mechanical Engineering,
    Noida Institute of Engineering and Technology,
    India
  • Dr. Safaa Najah Saud Al-Humairi
    Dept: Mechanical Engineering,
    Management and Science University,
    Malaysia
  • Dr. Mohamed Abbas
    Dept: Cooling and water treatment using Renewable Energy,
    UDES/CDER,
    Algeria
  • Mr. Lokesh KS
    Dept: Mechanical,
    Srinivas Institute of Technology,
    India
  • Miss. Ruchi Shukla
    Dept: Research and Development, Mechanical Engineering,
    Philips Healthcare,
    United States

Conference Gallery

Indexing / Supported by